RESUMO
The aim of this study was to evaluate the comfort of children and adolescents with conventional full-arch dental impression methods compared to two intraoral scanners (iTeroTM and PrimescanTM). METHODS: A monocentric, analytical, controlled crossover study was designed to compare conventional impression and digital impression with two intraoral scanners (iTeroTM and PrimescanTM) in children and teenagers. Patient comfort was evaluated using a 100 mm VAS scale adapted to Spanish and for children. A descriptive and analytical statistical method was conducted with a confidence level of 95% (p ≤ 0.05) and asymptotic or bilateral significance. RESULTS: A total of 51 subjects were enrolled in the study (mean age = 12.35 years). Although the group of 10-14-year-olds was the most numerous, gender was equally distributed among the age groups. None of the variables on the VAS scale showed differences between the gender categories (p > 0.05). There were differences (p < 0.05) with respect to the age categories, as the middle adolescent group showed the worst general perception and total comfort during the conventional impression. Statistically significant differences were found between all VAS scale items and the three impression methods (p < 0.05). CONCLUSIONS: The digital impression technique is superior in terms of total comfort to the conventional alginate impression in children and adolescents.
RESUMO
Introducción: Los dientes primarios juegan un importante papel en el crecimiento y desarrollo general de los niños, por lo que es necesario conservarlos hasta el momento de su recambio fisiológico. Cuando existe una afectación pulpar que compromete la vitalidad del diente, la pulpectomía se convierte en un reto para el odontopediatra debido a la compleja anatomía radicular de los dientes primarios. En esta revisión bibliográfica se darán a conocer diferentes sistemas de limas usados en odontopediatría, y así brindar una mirada actualizada de la instrumentación rotatoria al realizar pulpectomías en los molares primarios. Material y Método: se realizó una búsqueda bibliográfica en Pubmed y Web of Science de acuerdo con criterios de inclusión y exclusión previamente establecidos. Resultados: tras aplicar los criterios de inclusión y exclusión fueron seleccionados un total de 30 referencias bibliográficas de los últimos 15 años. Conclusión: las limas rotatorias pediátricas pueden considerarse alternativas seguras y más eficientes en la realización de pulpectomías en molares primarios, ya que se reduce el tiempo de tratamiento, se produce desbridamiento completo de los conductos y se mantiene la función del diente hasta su exfoliación. (AU)
Introduction: Primary teeth play an important role in the growth and development of children, so it is necessary to keep them until the moment of their physiological replacement. When there is a pulp involvement that compromises the vitality of the tooth, pulpectomy treatment becomes a challenge for the pediatric dentist due to the complex root anatomy of primary teeth. This review of the literature will present different file systems used in primary teeth and provide an updated look at rotary instrumentation when performing pulpectomies on primary molars. Material and Method: a bibliographic search was carried out in Pubmed and Web of Science according to previously established inclusion and exclusion criteria. Results: after applying the inclusion and exclusion criteria, a total of 30 bibliographic references from the last 15 years were selected. Conclusion: pediatric rotary files can be considered safe and more efficient alternatives in performing pulpectomies on primary molars, due to treatment time is reduced, complete debridement of the root canals is produced, and tooth function is maintained until exfoliation. (AU)
Assuntos
Dente Decíduo , Pulpectomia/instrumentação , Pulpectomia/métodos , Dente Molar , Odontopediatria/métodosRESUMO
Introducción: Los dientes primarios juegan un importante papel en el crecimiento y desarrollo general de los niños, por lo que es necesario conservarlos hasta el momento de su recambio fisiológico. Cuando existe una afectación pulpar que compromete la vitalidad del diente, la pulpectomía se convierte en un reto para el odontopediatra debido a la compleja anatomía radicular de los dientes primarios. En esta revisión bibliográfica se darán a conocer diferentes sistemas de limas usados en odontopediatría, y así brindar una mirada actualizada de la instrumentación rotatoria al realizar pulpectomías en los molares primarios. Material y Método: se realizó una búsqueda bibliográfica en Pubmed y Web of Science de acuerdo con criterios de inclusión y exclusión previamente establecidos. Resultados: tras aplicar los criterios de inclusión y exclusión fueron seleccionados un total de 30 referencias bibliográficas de los últimos 15 años. Conclusión: las limas rotatorias pediátricas pueden considerarse alternativas seguras y más eficientes en la realización de pulpectomías en molares primarios, ya que se reduce el tiempo de tratamiento, se produce desbridamiento completo de los conductos y se mantiene la función del diente hasta su exfoliación. (AU)
Introduction: Primary teeth play an important role in the growth and development of children, so it is necessary to keep them until the moment of their physiological replacement. When there is a pulp involvement that compromises the vitality of the tooth, pulpectomy treatment becomes a challenge for the pediatric dentist due to the complex root anatomy of primary teeth. This review of the literature will present different file systems used in primary teeth and provide an updated look at rotary instrumentation when performing pulpectomies on primary molars. Material and Method: a bibliographic search was carried out in Pubmed and Web of Science according to previously established inclusion and exclusion criteria. Results: after applying the inclusion and exclusion criteria, a total of 30 bibliographic references from the last 15 years were selected. Conclusion: pediatric rotary files can be considered safe and more efficient alternatives in performing pulpectomies on primary molars, due to treatment time is reduced, complete debridement of the root canals is produced, and tooth function is maintained until exfoliation. (AU)
Assuntos
Dente Decíduo , Pulpectomia/instrumentação , Pulpectomia/métodos , Dente Molar , Odontopediatria/métodosRESUMO
Injuries to the dentofacial region caused by third parties can affect physiological, sensory and esthetic functions with legal repercussions. The personal and social circumstances generated by Covid-19 and the governmental measures taken to control it, have increased the risk factors for violence and with it, the resulting injury rate. The aim of the present investigation was to compare the amount of civil liability for dental injury crimes agreed by Spanish courts, in certain Autonomous Communities, before and during the pandemic situation caused by Covid-19. For this purpose, a analytic cross-sectional study was carried out by analyzing sentences from the database of the Judicial Documentation Center. A comparison of means (one-way ANOVA) was used on the amount of compensation between the different years, and between the Autonomous Communities of Madrid, Catalonia Cataluña, Andalusia, the Canary Islands and the Valencian Community. It was observed that the year 2020 stood out for the increase in the number of cases of dental injury offenses. For its part, the Autonomous Community of Andalusia showed the highest amount of compensation during the pandemic, although the highest number of cases corresponded to the Community of Madrid. The statistical analysis yielded a probability of more than 0.05, which eliminated the possibility of significant differences in each of the comparisons.
Assuntos
COVID-19 , Traumatismos Dentários , Humanos , Estudos Transversais , COVID-19/epidemiologia , Espanha/epidemiologiaRESUMO
Introduction: Rough titanium surfaces biofunctionalised by osteogenic proteins, such as BMP-2, have been shown to accelerate the osseointegration process and reduce waiting times for prosthetic loading. The preclinical study presented here compared the bone in contact with the implant and bone neoformation and density between titanium (Ti) implants with a conventional etched surface (SLA type) and others treated with carboxyethylphosphonic acid (CEPA) and bone morphogenetic protein 2 (BMP-2), after 4 weeks of implantation in the tibia of a minipig model. Methods: Sixteen implants (eight experimental and eight control) of Ti-Al16-V4 with a tapered screw design and internal hexagonal connection were randomly inserted into the tibiae of four minipigs, four in each tibia. The experimental implants were treated with CEPA and BMP-2 and sterilised with gamma radiation (25 KG). The insertion torque was 40 N and primary stability was measured with the Osstell® device (ISQ 64 ± 2.6). Five bone parameters were evaluated: bone in contact with the implant (BIC), bone in contact with the corrected implant (BICc), new bone formation (BV/TV), bone density between threads (BAI/TA) and peri-implant bone density (BAP/TA). A histomorphometric study was performed and the samples were digitised with Adobe Photoshop Cs6. Statistical analysis of the variables was performed using SAS 9.4. Results: After a period of 4 weeks, no significant clinical signs were observed and all implants were integrated. Light microscopy of the experimental group revealed an ICB with no signs of fiber tissue, but with areas of ectopic new bone in the medullary space. Statistical analysis showed significant results for BIC and BICc (p = 0.0001 and p = 0.001, respectively). No statistical signification was found for the other parameters evaluated. Conclusion: Despite the limitations of this study, our results demonstrated that dental implant surfaces treated with CEPA and BMP-2 improve their biological response to osseointegration.
RESUMO
Periodontal diseases (PD) are common chronic inflammatory oral pathologies that are strongly linked to others not found in the mouth cavity. The immune system mediates the host response, which includes the upregulation of proinflammatory cytokines, metalloproteinases, and reactive oxygen species (ROS); the latter may play an important role in the establishment and progression of inflammatory diseases, particularly periodontal disease, via the development of oxidative stress (OS). Natural antioxidants have powerful anti-inflammatory properties, and some can reduce serum levels of key PD indicators such tumor necrosis factor (TNF) and interleukin IL-1. This review compiles, through a thorough literature analysis, the antioxidant, anti-inflammatory, and antibacterial effects of a variety of natural products, as well as their therapeutic potential in the treatment of PD.
RESUMO
Purpose: The aim of this systematic review is to evaluate the perception of the patient, the chairside time, and the reliability and/or reproducibility of intraoral scanners for full arch in pediatric patients. Methods: A data search was performed in four databases (Medline-Pubmed, Scopus, ProQuest and Web of Science) in accordance with the PRISMA 2020 statements. Studies were classified in three categories (patient perception, scanning or impression time and reliability and/or reproducibility). The resources, the data extraction and the quality assessment were carried out independently by two operators. The variables recorded were population characteristics, material and methods aspects and included country, study design and main conclusion. A quality assessment of the selected studies was performed with QUADAS-2 tool, and Kappa-Cohen Index was calculated to analyze examiner agreement. Results: The initial search obtained 681 publications, and finally four studies matching inclusion criteria were selected. The distribution of the studies in the categories was three for the analysis of the patient's perception and scanning or impression time; and two items to assess the reliability and/or reproducibility of intraoral scans. All included studies have a repeated measures-transversal design. The sample size ranged between 26 and 59 children with a mean age. The intraoral scanners evaluated were Lava C.O.S, Cerec Omnicam, TRIOS Classic, TRIOS 3-Cart and TRIOS Ortho. The quality assessment of the studies using QUADAS-2 tool revealed a low risk of bias while evaluating patient perception, but an unclear risk of bias in the analysis of accuracy or chairside time. In relation to the applicability concerns, the patient selection was of high risk of bias. All studies agreed that the patient perception and comfort is better with intraoral scanners in comparison with the conventional method. The accuracy or reliability of the digital procedure is not clear, being clinically acceptable. In relation with the chairside time, it depends on the intraoral scanner, with contradictory data in the different analyzed studies. Conclusion: The use of intraoral scanners in children is a favorable option, finding a significantly higher patient perception and comfort with intraoral scanners compared to the conventional impression method. The evidence for reliability or reproducibility is not strong to date, however, the differences between the intraoral measurements and the digital models would be clinically acceptable.
RESUMO
One of the most used rotary files in endodontics is NiTi files due to their superelastic properties. This property means that this instrument has extraordinary flexion that can adapt to large angles inside the tooth canals. However, these files lose their superelasticity and fracture during use. The aim of this work is to determine the cause of fracture of the endodontic rotary files. For this purpose, 30 NiTi F6 SkyTaper® files (Komet, Germany) were used. Their chemical composition was determined by X-ray microanalysis, and their microstructure was determined by optical microscopy. Successive drillings were carried out with artificial tooth molds at 30, 45, and 70°. These tests were carried out at a temperature of 37 °C with a constant load controlled by a high sensitivity dynamometer of 5.5 N, and every five cycles were lubricated with an aqueous solution of sodium hypochlorite. The cycles to fracture were determined, and the surfaces were observed by scanning electron microscopy. Transformation (austenite to martensite) and retransformation (martensite to austenite) temperatures and enthalpies were determined by Differential Scanning Calorimeter at different endodontic cycles. The results showed an original austenitic phase with a Ms temperature of 15 °C and Af of 7 °C. Both temperatures increase with endodontic cycling, indicating that martensite forms at higher temperatures, and the temperature must be increased with cycling to retransform it to austenite. This fact indicates the stabilization of martensite with cycling, which is confirmed by the decrease in both transformation and retransformation enthalpies. The martensite is stabilized in the structure due to defects and does not retransform. This stabilized martensite has no superelasticity and, therefore, fractures prematurely. It has been possible to observe the stabilized martensite by studying the fractography, observing that the mechanism is by fatigue. The results showed that the files fracture earlier the greater the angle applied (for the tests at 70° at 280 s, at 45° at 385 s, and at 30° at 1200 s). As the angle increases, there is an increase in mechanical stress, and, therefore, the martensite stabilizes at lower cycles. To destabilize the martensite, a heat treatment can be carried out at 500 °C for 20 min, and the files recovers all its superelasticity.
RESUMO
The aim of this work was to analyze and compare the effect of bone morphogenetic protein-7 on biological parameters related to implant osseointegration in an experimental animal model. Sixteen dental implants were placed in the tibias of four randomly selected minipigs for the following dental implant surface treatments: Group A: conventional treatment of the dental implant surface by SLA (n = 8) and Group B: treatment of the dental implant surface with carboxyethylphosphonic acid and bone morphogenetic protein-7 (n = 8). The animals were sacrificed one month after dental implants placement and a histomorphometric study was performed for the evaluation of bone-to-implant contact, corrected bone-to-implant contact, new bone formation, interthread bone density and peri-implant density using Student's t-test and the non-parametric Mann-Whitney test. The histomorphometric parameters bone-to-implant contact and corrected bone-to-implant contact showed statistically significant differences between the study groups; 34.00% ± 9.92% and 50.02% ± 10.94%, respectively (p = 0.004) for SLA and 43.08% ± 10.76% and 63.30% ± 11.30%, respectively (p = 0.003) for BMP-7. The parameters new bone formation, interthread bone density and peri-implant density did not show statistically significant differences between the study groups (p = 0.951, p = 0.967 and p = 0.894, respectively). Dental implant surfaces treated with carboxyethylphosphonic acid and BMP-7 improve the biological response of dental implants to osseointegration.
RESUMO
The aim of this study was to determine the possibility of identifying a dental implant through the measurement of the apical width and the interspiral distance in a periapical radiograph after being subjected to high temperatures for certain lengths of time. In total, 11 fresh human anatomical models were selected, in which 137 implants were placed. Previous periapical radiographs were performed using parallelizers in each implant. Subsequently, the anatomical models were introduced into a crematory oven at different temperatures and for various durations: 500 °C/15 min, 500 °C/30 min, 700 °C/15 min, 800 °C/15 min, 800 °C/45 min, 500 °C/15 min, 700 °C/15 min, and finally, 1000 °C/120 min. After this, X-rays were taken via a parallel technique, and the apical width and interspiral distance were measured. The implants were disinserted, and the coronal width was used to calculate magnification or possible distortion. All data were analyzed by the Mann-Whitney U test. There were no statistically significant differences for the apical width parameter, except when the temperature was raised to 700 °C/15 min and to 800 °C/45 min. For the interspiral distance parameter, there were no statistically significant differences, except when the implants were subjected to 800 °C/15 min and 1000 °C/120 min. It was determined that there were changes in some groups based on the increase in temperature and exposure time. Neither of the two parameters were completely useful for the identification because some of the groups studied in both variables presented differences, which makes them difficult to identify correctly.
RESUMO
The mechanical properties of polyurethane dental aligners have been studied in an oral environment at 37°C and subjected to thermal cycling between 5°C and 55°C for long periods of time at different mechanical stresses. The aim is to determine the efficacy of the orthodontic aligner at different stress levels, the effect of thermal cycling with therapy time on tooth position correction. Sixty aligners with the same design were studied applying tensions of 0, 3 and 30 N and determining the deformation at different times from 1 to 760 h. Half of these aligners were subjected to stresses submerged in artificial saliva at 37°C and the other half were subjected to thermal cycles between 2°C and 55°C in salivary medium. Deformation was determined using a high-resolution stereo magnifier and ImageJ image analysis software. Water adsorption by the polyurethane was determined at the different test times. The results showed that in the unloaded aligners there is no appreciable deformation, but with thermal cycling there is a light shrinkage of the aligner due to the semi-crystallization process (ordering of polymeric chains) of the polyurethane. When applying loads of 3 and 30 N, creep curves with constant deformation transition zones can be seen. The transition zones decrease as the applied mechanical load increases. In addition, the significant effect of thermal cycling on the reduction of the transition zone of the aligners has been demonstrated. The transition zones are optimal for dental correction as constant stresses are exerted for tooth movement. The effect of thermal cycling shortens the constant deformation zone and reduces tooth alignment time. It was observed that the absorption of water in the aligner is constant after 1 h of immersion and does not exceed 0.4% by weight of absorbed water.
RESUMO
Titanium and alloy osseointegrated implants are used to replace missing teeth; however, some fail and are removed. Modifications of the implant surface with biologically active substances have been proposed. MEDLINE [via Pubmed], Embase and Web of Science were searched with the terms "titanium dental implants", "surface properties", "bioactive surface modifications", "biomolecules", "BMP", "antibacterial agent", "peptide", "collagen", "grown factor", "osseointegration", "bone apposition", "osteogenic", "osteogenesis", "new bone formation", "bone to implant contact", "bone regeneration" and "in vivo studies", until May 2022. A total of 10,697 references were iden-tified and 26 were included to analyze 1,109 implants, with follow-ups from 2 to 84 weeks. The ARRIVE guidelines and the SYRCLE tool were used to evaluate the methodology and scientific evidence. A meta-analysis was performed (RevMan 2020 software, Cochane Collaboration) with random effects that evaluated BIC at 4 weeks, with subgroups for the different coatings. The heterogeneity of the pooled studies was very high (95% CI, I2 = 99%). The subgroup of BMPs was the most favorable to coating. Surface modification of Ti implants by organic bioactive molecules seems to favor osseointegration in the early stages of healing, but long-term studies are necessary to corroborate the results of the experimental studies.
RESUMO
PURPOSE: To determine the prevalence of COVID-19 infection among dental professionals at an Academic Center in Madrid (Spain) at the beginning of the pandemic's de-escalation phase. MATERIALS AND METHODS: A cross-sectional study was designed. COVID-19 infection was determined by membrane-based immunoassay qualitative detection of IgG and IgM antibodies in human whole blood. Age, sex, race and professional qualification were recorded, as were symptoms compatible with COVID-19 infection whenever present. Data collected were analysed by means of descriptive and qualitative (X2) statistical analyses. RESULTS: A total of 195 individuals were included (40 administrative professionals and 155 dentists). Seroprevalence at the end of the de-escalation phase was 20.0% among all the participants. The highest prevalence was found among the orthodontists (34.8%), followed by the paediatric dentists (28.6%) and oral surgeons (14.7%). Most subjects were positive for IgG and negative for IgM (79.5%). CONCLUSIONS: The seroprevalence of SARS-CoV-2 among dental professionals at the end of the de-escalation phase after the first wave of the pandemic was almost double the seroprevalence of the general population. Orthodontists had the highest rates of SARS-CoV-2 infection.
Assuntos
COVID-19 , SARS-CoV-2 , Criança , Humanos , COVID-19/epidemiologia , Pandemias , Espanha/epidemiologia , Estudos Soroepidemiológicos , Dentística Operatória , Estudos Transversais , Imunoglobulina M , Odontólogos , Imunoglobulina GRESUMO
Survival studies of dental implants currently reach high figures. However, considering that the recipients are middle-aged individuals with associated pathologies, research is focused on achieving bioactive surfaces that ensure osseointegration. Chitosan is a biocompatible, degradable polysaccharide with antimicrobial and anti-inflammatory properties, capable of inducing increased growth and fixation of osteoblasts around chitosan-coated titanium. Certain chemical modifications to its structure have been shown to enhance its antibacterial activity and osteoinductive properties and it is generally believed that chitosan-coated dental implants may have enhanced osseointegration capabilities and are likely to become a commercial option in the future. Our review provided an overview of the current concepts and theories of osseointegration and current titanium dental implant surfaces and coatings, with a special focus on the in vivo investigation of chitosan-coated implants and a current perspective on the future of titanium dental implant coatings.
RESUMO
Osseointegration capacity and good mechanical behavior are key to the success of the dental implant. In many investigations, comparisons of properties are made using different dental implant designs and therefore the results can be influenced by the macrodesign of the dental implant. In this work, studies were carried out with the same dental implant model using different roughness and different materials-commercially pure titanium (grade 4) and zirconia. For this purpose, 80 smooth passivated titanium (Ti), 80 smooth zirconia (ZrO2), and 80 rough passivated titanium (Ti-R) dental implants were used. The samples were characterized by their roughness, wettability, surface energy, residual stresses, and fatigue behavior. The implants were implanted in minipigs for 4 and 12 weeks. The animals were sacrificed, and histological studies were carried out to determine the osseointegration parameters for each of the implantation times. Ti and ZrO2 dental implants have very similar wettability and surface energy properties. However, the roughness causes a decrease in the hydrophilic character and a decrease of the total surface energy and especially the dispersive component, while the polar component is higher. Due to the compressive residual stresses of alumina sandblasting, the rough dental implant has the best fatigue behavior, followed by Ti and due to the lack of toughness and rapid crack propagation the ZrO2 implants have the worst fatigue behavior. The bone index contact (BIC) values for 4 weeks were around 25% for Ti, 32% for ZrO2, and 45% for Ti-R. After 12 weeks the Ti dental implants increased to 42%, for Ti, 43% for ZrO2, and an important increase to 76% was observed for Ti-R implants. In vivo results showed that the key factor that improves osseointegration is roughness. There was no significant difference between ZrO2 and Ti implants without sandblasting.
RESUMO
Some research has suggested that dental plaque and saliva could be reservoirs of Helicobacter pylori (H. pylori) and be capable of infecting or re-infecting the gastric mucosa after eradication, with certain studies showing a significant association between PD and gastric infection by this bacterium. An electronic search was performed in PubMed, EMBASE, and Web of Science databases with the terms "Helicobacter pylori AND periodontal diseases"; "Helicobacter pylori AND gingivitis"; "Helicobacter pylori AND chronic periodontitis"; "Helicobacter pylori AND periodontitis"; "Helicobacter pylori AND dental plaque", to identify articles up to September 2021. The Newcastle-Ottawa scale was used to assess study quality. A meta-analysis was performed using RevMan 2020 (Cochane Collaboration) software. A total of 1,315 studies were identified and 12 were included, analyzing 226,086 patients with mean age between 10.5 and 63.4 years. The prevalence of H. pylori in the oral cavity ranged from 5.4 to 83.3%. A random-effects model was used to analyze the presence of H. pylori and subgroups were made according to the method of evaluation (PCR or RUT). Statistical significance was found in the overall analysis (p = 0.01). There is no clear evidence that H. pylori present in oral bacterial plaque causes gastric infection and vice versa. Systematic Review Registration: www.INPLASY.COM, identifier: INPLASY2021100097.
RESUMO
Surface treatments of Ti in the dental implant industry are performed with the aim of in-creasing its bioactivity and osseointegration capacity. Chitosan (Cht) is a polysaccharide that has been proposed as a promising biomaterial in tissue engineering and bone regeneration, due to its ability to stimulate the recruitment and adhesion of osteogenic progenitor cells. The aim of our preliminary study was to evaluate, by micro-computed tomography (micro-CT), the osseointegration and bone formation around Cht-coated implants and to compare them with conventional surface-etched implants (SLA type). Four im-plants (8.5 mm length × 3.5 mm Ø) per hemiarch, were inserted into the jaws of five dogs, divided into two groups: chitosan-coated implant group (ChtG) and control group (CG). Twelve weeks after surgery, euthanasia was performed, and sectioned bone blocks were obtained and scanned by micro-CT and two bone parameters were measured: bone in contact with the implant surface (BCIS) and peri-implant bone area (PIBA). For BCIS and PIBA statistically significant values were obtained for the ChtG group with respect to CG (p = 0.005; p = 0.014 and p < 0.001 and p = 0.002, respectively). The results, despite the limitations, demonstrated the usefulness of chitosan coatings. However, studies with larger sample sizes and adequate experimental models would be necessary to confirm the results.
RESUMO
BACKGROUND: Paragangliomas are rare vascular neuroendocrine tumors that develop in the extra-adrenal paraganglion tissue. They occur most commonly at the carotid bifurcation, where they are known as carotid body tumors. Most paragangliomas are benign, locally aggressive, infiltrative tumors. Approximately 10% of patients with paragangliomas develop distant metastases, 10% present with multiple or bilateral tumors (mostly carotid body tumors), and 10% have a family history of paragangliomas. The malignant transformation of carotid body tumors has been reported in 6% of cases. CASE PRESENTATION: We present the case of a 64 year-old Caucasian woman with a gigantic glomic tumor mass in the neck. Twenty years before the consultation, the patient had undergone an unsuccessful attempt to remove the mass. Over the last 3 years, the patient had felt enlargement of the mass at an increased rate, almost doubling the prior size. Angio magnetic resonance imaging showed a 9 cm paratracheal mass on the left cervical side that laterally displaced the sternocleidomastoid muscle and 2 c m of the trachea. Due to the change in the tumor behavior, the maxillofacial team at Ruber International Hospital decided to remove the tumor surgically after embolization. During the surgery the tumor was gently dissected from the carotid an removed from the carotid bifurcation uneventfully. Two small nodes adhering tightly to the internal carotid adventitia and the posterior torn hole were left in place to avoid any potentially life-threatening complications. The final biopsy confirmed the initial diagnosis of carotid body paraganglioma and showed a Ki-67 expression of 19%. Due to the aggressive growth behavior and high Ki-67 expression of the tumor, the patient was referred to the CyberKnife Unit of Ruber International Hospital for treatment of the remaining nodes. CONCLUSIONS: The management of cervical paragangliomas is difficult and remains a challenge. Although the likelihood of tumor control is high with surgical or radiotherapeutic treatments, we currently lack consensus regarding the best treatment option. Nevertheless, in selected complex cases, such as the case we present, the combination of surgery and radiosurgery may allow complete local tumor control with minimal morbidity.
Assuntos
Tumor do Corpo Carotídeo , Paraganglioma Extrassuprarrenal , Paraganglioma , Tumor do Corpo Carotídeo/diagnóstico por imagem , Tumor do Corpo Carotídeo/radioterapia , Tumor do Corpo Carotídeo/cirurgia , Feminino , Humanos , Imageamento por Ressonância Magnética , Pessoa de Meia-Idade , Pescoço/patologia , Paraganglioma/cirurgia , Paraganglioma Extrassuprarrenal/diagnósticoRESUMO
Surface functionalization of dental implant surfaces has been a developing field in biomaterial research. This study aimed to obtain self-assembled monolayers (SAMs) using carboxyethylphosphonic acid on the surface of titanium (Ti) screws, and assessed the surface characteristics, biomechanical, and cellular behavior on the obtained specimens. This study had three groups, i.e., a control (untreated screws), a test group treated with phosphonic acid, and a third group with treated acid and bone morphogenetic protein (BMP-2) for in vitro analysis of cell lines. The assessed parameters included surface wettability, surface characteristics using scanning electron microscopy (SEM), protein immobilization, and cellular behavior of fibroblasts and mesenchymal stem cells of adipose tissue (MSCat cells). For surface wettability, a Welch test was performed to compare the contact angles between control (67 ± 1.83) and test (18.84 ± 0.72) groups, and a difference was observed in the mean measurements, but was not statistically significant. The SEM analysis showed significant surface roughness on the test screws and the cellular behavior of fibroblasts, and MSCat cells were significantly improved in this group, with fibroblasts having a polygonal shape with numerous vesicles and MSCat cells stable and uniformly coating the test Ti surface. Surface biofunctionalization of Ti surfaces with phosphonic acid showed promising results in this study, but remains to be clinically validated for its applications.
RESUMO
There is increasing evidence for oral lesions and manifestations of COVID-19. The aim of this meta-analysis was to investigate the types of oral manifestations of COVID-19 and their prevalence. PubMed/Medline, Scopus, Web of Science, and Google Scholar databases were used to search for publications on oral manifestations in patients with PCR-confirmed COVID-19. A total of 310 records were selected, and 74 were included. Oral lesions in COVID-19 were classified according to their etiologies, including iatrogenic lesions caused by intubation and opportunistic infections. Of the included studies, 35 reported oral lesions probably caused by severe acute respiratory syndrome-Coronavirus-2 (SARS-CoV-2) infection. Meta-analysis of prevalence data on oral manifestations and aphthous lesions indicated high heterogeneity, while meta-analysis of xerostomia prevalence data revealed a pooled prevalence, with considerable heterogeneity. In conclusion, the meta-analysis yielded high heterogeneity between studies: oral lesions yielded a prevalence of 0.33 (95% CI 0.11-0.60), xerostomia lesions a prevalence of 0.44 (95% CI 0.36-0.52) and aphthous lesions 0.10 (95% CI 0.01-0.24). In addition, a gap in the evidence regarding the prevalence of oral lesions in COVID-19 was identified and the need for further observational studies focusing on this issue and on the causal relationships between oral lesions and COVID-19 was highlighted.
